Foot-mounted, available  in 3/4'' through 1-1/2'' sizes. 1/4 to 1 HP at 1750 RPM. Available in bronze-fitted, all-bronze and all-iron construction with flows to 115 GPM at 30 feet.

End suction, close-coupled, foot-mounted pump available in 1-1/4'' through 6'' sizes. Motor size 3/4 to 50 HP at 1750 RPM, 2 to 60 HP at 3500 RPM. Available in bronze-fitted, all-iron and all-bronze construction with flows to 2300 GPM, heads to 400 feet. For horizontal and vertical mount.

Foot-mounted, end-suction, close-coupled pump available in 1'' through 1-1/2'' sizes. Motor sizes 1/3 to 5 HP at 3500 RPM. Available in bronze-fitted construction with flows to 240 GPM at 115 feet.  For horizontal and vertical mount. 

The new standard in close-coupled general service pumps. The all new 316L Stainless Steel (wet end) pump available in 1", 1-1/4'' and 1-1/2'' sizes. 1/2 HP through 5 HP at 3500 RPM. Flows to 170 GPM and heads to 155 feet.

The Series VSCS is a double suction pump that has a vertically split casing shaft similar to the VSC. In this case, however, the suction inlet is horizontal, while the discharge remains vertical. This configuration is ideal for side-suction piping arrangements and maintains a small footprint with the discharge in the vertical configuration.
Discharge connections range from 4'' through 12''.  Capacities rangeover 9000 GPM with heads to 400 feet and motor requirements up to 600 HP.

The new VSX Double-Suction Split-Case Pump is designed for the new millenium. It features  Maintenance-Free Bearings, new One-Piece Unitized Seal, Groutless Base Plate, Alignment-Friendly Coupling, reduced pump room footprint by up to 40% when compared to traditional split-case and vertical inline pumps.  Read more in: Product Bulletin, Technical Bulletin. Our new VSX pump is available in 21 sizes!

Double-suction, base-mounted Series HSC³ pumps are available in 2'' through 10'' sizes. Motor sizes through 300 HP. Flows to 6500 GPM and heads to 400 feet. Bronze-fitted construction with a maximum working pressure of 175 psig. Features internally self-flushing mechanical seals for maximum lubrication, debris removal and heat dissipation. The internally flushed seals allow for a shorter shaft for reduced deflection for longer seal life.

Double-suction, base-mounted Series HSCS pumps are available in 6'' through 24'' sizes. Motor sizes through 4000 HP. Flows to 40,000 GPM and heads to 600 feet. Externally flushed mechanical seals are standard features on this series.

A combination shut-off, center-guided non-slam check valve and calibrated balance valve in one device. The combination of three valves in one minimizes cost and reduces installation time. Available in angle or straight pattern in 1'' through 16'' sizes; in flanged, grooved or NPT connections. The triple-duty valve has a cast iron body, brass seat, cast bronze disc and SS stem. A calibrated nameplate and memory button allow return of the valve to the balanced position after shut-off. The backseating valve stem allows repacking under full-line pressure.

Bell & Gossett Series 80 centrifugal pumps also known as B&G 80 pumps  literature, manuals, CAD ITT Bell & Gossettpumpsrawings, detail drawings, online selection, online parts selection.